Luton Council Supply of DAF 7.5 T Tipper with bespoke body
Main contract details
Due to delivery constraints this will be available for a short period of time only
The Specification
ChaChassis:
DAFLF 45 LF180 7.5t GVW day cab in white, 3550mm wheelbase, Dual passenger seat, Radio with USB
Connector Reverse bleeper with switch, Thatcham immobilizer, Central locking (standard), Vertical exhaust
Asymmetric rear springs, Gearbox PTO with in-cab switch N/1c-Z, Engine speed controller, connector on
Chassis, Application connection on chassis, Daytime running lights, 225/75 R17.5 tyres to each axle
Park brake with spoken warning, High level air intake, Front and rear strobes, mud flaps and internal rubber
Mats.
Bespoke Body:
Brit-Tip cage tipper or similar, aluminium drop sides, with dump-over tail-lift - see attached spec.
Rear direction board, Steel front end tipping body with extruded aluminium sides to fit ,To fit DAF LF45
3150mm wheelbase chassis cab - 7.5 tonne GVW, Heavy duty steel ladder gantry, Steel headboard with
galvanized mesh infill to suit cage, Steel floor, Galvanised steel chassis sub frame, Binotto front end tipping
gear with in cab controls, Thermoplastic rear wings, Aluminium sideguards, Regulation marker lights where
required , Body steelwork painted 2 pack gloss finish – WHITE, Aluminium drop sides unpainted in anodized
finish 1800mm high (above drop sides) galvanized mesh side extensions, one sliding door per side, Removable
centre pillars and two removable (lift off) mesh doors per side, Rear to have 1800mm high barn doors with
container lock mechanisms & side retaining mechanism, Unpainted Galvanised finish, Shovel & sack barrow
rack fitted to headboard, 1200mm Amber LED lightbar fitted to cab roof, DEL DO1000HG dump over tail lift
787mm platform with 150mm fixed ramp, Fixed position, twin switches, inside & out, 1 pair of high intensity
SD24 LED amber lamps fitted to top of rear pillars, 1 pair of high intensity SD24 LED amber lamps fitted to
top of front ladder gantry, Chapter 8 : Chevron board to rear, yellow reflective tape to cab, body and door edges
Handbook and formal operator handover, 1st registration fee and 12 months road fund licence (£205)
Note: The DEL brand of Tail Lift is to be replaced with the equivalent DHOLLANDIA brand, to the same
Specification, in size of lift, lifting capacity etc
Key dates
Expression of interest window
From 26/07/2019 14:00 to 26/07/2019 15:00
New to ProContract?
If you are not currently registered on the ProContract procurement portal, you can complete a simple registration process by clicking the following link - Register free
Contact details
Luton
Bedfordshire
LU1 2BQ
United Kingdom
